Introduction

 

Are you a Targeted Individual?  Do you have strange vibrations, painful sensations and pressure in and on your body?  There are general sensations which make you feel vibrations or heat, an implant provides a tool to torture you repeatedly or continuously in the same place.

 

This misused technology uses implants to guide energy (inductive coupling) to your body to produce psychological effects and physiological pain. This page will provide links to articles you can print and show to the uninformed and nonbelievers to prove that these technologies exist, you know about them and that they are being used illegally on you against your will to degrade your health and rob you of your life, liberty and pursuit of happiness. Happiness requires control of your own mind and body and freedom to choose who to socialize with or to be left alone to develop your own thoughts. If someone takes control of your ability to think for yourself, you are no longer free to pursue anything. Technology can deprive you of the life God gave you and it can take all your rights away. This is being done to Targeted Individuals and has been taking the lives of humans in the name of research for decades in human experiments. 

 

Beaming radio and microwave frequencies at someone to injure or cause them pain is a criminal assault. Assault deprives you of your Constitutional right to refuse this technology. The US Constitution assures your freedom from human experimentation, however, recent Executive Orders are allowing this assaault.

 

The Patriot Act was hastily signed to institute an illegal War on Terror using so-called non-lethal weapons using directed energy and implants for tracking and punishment. The US Government and other countries are using the technology to torture people using a 24 hour regimen of sleep deprivation, repeated covert implantation, vibration of the whole body and body parts, radiation burning and maiming, inducement of diseases such as diabetes and joint degradation, body modification (reducing bones in size and reducing cartilage from ears and face) and other cruel and unusual acts which take away the freedom God gave us and the life the Constitution assures us.

 

The first article I have chosen is a brilliant overview of implants, both chronic (permanent) and acute (temporary). Implants are a medical procedure and when they are done covertly, they constitute vandalism of personal property and institution of slavery over a human being. You no longer own you body and its functions. Someone else has control over your body, therefore, you are their slave.

 

You may make a personal decision based on what you know about who is doing this to you.  However, this plan is outlined in the Patriot Act. The US Goverment contracts with companies who hire people who oversee your individual torture, keep a detailed record of when implants were done, what was done to torture you each day and a personal overall plan for your individual torture.  How do we know this?  Different people talk about how they are tortured, some are the same, some are different but fit the implant/torture criteria, some being age dependent.  Different types of implants are in different people.  Someone chooses which implants will be used to torture each individual. Who are these people and where do they go to work every day.  How long are their shifts?  How much are they paid?  Do they have a retirement plan?  How long will you be tortured.  All indications are that once you are in the torture program, it is for life.

 

Where are the radio/microwave/ultrasound frequencies coming from, your neighbor's homes, city/utility infrastructure, cell towers, satellites, or all of them, using installations as relays of energy beams. Hopefully by learning about what kind of implants you have, you can find out what they need in the way of power or stimulation from outside sources and connect your implants with the source of energy being used to torture you and the people doing it. There is much work to be done on this subject.

 

If you work at a job torturing people and decide to become a whistleblower, please step forward and help humanity before they do this to you too.  It is inevitable that everyone will become sick, handicapped or elderly.  These are the people they are attacking first to cleanse humanity like Hitler did. He emptied the hospitals and used nurses and doctors to do it.  That didn't last and neither will this regime against life and liberty.  Good will prevail.

Implant Technology

Wireless Sensor Networks

"The range of wearable and implantable biomedical devices will increase significantly in the next years, thanks to the improvements in micro-electro-mechanical systems (MEMS) technology, wireless communications, and digital electronics, achieved in recent years [5]. These advances have allowed the development of low-cost, low power, multi-functional sensor nodes that are small in size and can communicate over short distances, and tiny sensor nodes, which consist of sensing, data processing, and communicating components, and to take advantage of the idea of sensor networks based on collaborative effort of a large number of nodes."

Website Inductive Coupling.JPG
Website Inductive Coupline Construction.
Website MEMS on a chip.JPG
Website MEMS on a chip 2.JPG

A MEMS-based fully-integrated wireless neurostimulator

http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=5442507&url=http%3A%2F%2Fieeexplore.ieee.org%2Fxpls%2Fabs_all.jsp%3Farnumber%3D5442507

 

We report design, fabrication and in-vivo animal testing of a MEMS-based wireless battery-free compact (3.1 × 1.5 × 0.3 mm) neurostimulator for the treatment of chronic pain. The neurostimulator consists of a spiral coil for inductive power coupling, Schottky diodes for rectification, an ASIC neurostimulator circuit chip, and biphasic platinum-iridium (PtIr) stimulation electrodes. The device is fully integrated and completely embedded in biocompatible SU-8 packaging. The wireless neurostimulator was implanted subcutaneously in a rat hind limb and stable and robust cortical responses during extended periods of wireless stimulation with as low as 21 dBm (125 mW) RF power at 394 MHz were recorded.

MEMS-based Pressure Systems

http://www.medgadget.com/2007/07/memsbased_pressure_systems_from_issys.html


Integrated Sensing Systems, Inc. (ISSYS), an Ypsilanti,

MI company, has announced that “the U.S. Patent Office

has granted a patent titled “System for monitoring conduit

obstruction” (U.S. Patent No. 7,211,048), which covers the design and manufacturing of a wireless implantable sensing system for non-invasive monitoring of pressure and/or pressure gradients in a cardiac conduit.”
This is certainly not the first batteryless MEMS pressure monitoring device that we’ve seen around here. The EndoSure™ Wireless AAA Pressure Measurement System from CardioMEMS, Inc. has been 510(k)’ed by the FDA two years ago. What’s different about this system is its super-miniature size, designed to fit inside the diagnostic catheter for delivery into atrium, or into palliative shunts and conduits in pediatric heart patients, or into hydrocephalus shunts.
Company explains its technology:

Certain heart defects require implantation of a cardiac blood flow conduit in order to bypass valve aplasia or severe stenosis. One of the main issues with implanted cardiac conduits is that over time calcification or stenosis will occur and, in nearly all cases, occlusion will occur eventually. ISSYS’ novel implantable wireless sensing system allows physicians a means for accurate and non-invasive monitoring of conduit condition on a continuous basis. Using the data provided by ISSYS’ sensors, physicians can continuously monitor both pressure and blood flow rate within the conduit, in order to determine whether and when conduit revision is required. Furthermore, remote monitoring of conduit condition would simultaneously reduce the number of hospital and clinic visits while increasing the overall timeliness of treatment…
The pressure monitoring system consists of two major parts: an implantable, batteryless, telemetric sensor and a companion hand-held reader. The miniature implantable micro-device, suitable for implantation directly (via a custom catheter for minimally invasive, outpatient procedure), contains a MEMS pressure sensor along with custom electronics and an antenna for both wireless communication and tele-powering.
Using magnetic telemetry, the reader transmits power to the sensor and the sensed pressure is in turn transmitted back to the reader. Small size, optimized shape, and careful choice of materials ensure implant biocompatibility and non-thrombogenicity. Furthermore, the implant is delivered with a specially designed catheter as a low-cost outpatient procedure. Data collected by the sensor will be used by physicians to tailor treatment of the selected disease.

Website MEMS based pressure system 2.JPG

MEMS: Laying The Foundation For Exciting Applications

RF, biomedical, and geophysical/environment fields will be key beneficiaries.

http://electronicdesign.com/mobile/mems-laying-foundation-exciting-applications

 

Although microelectromechanical system (MEMS) devices started out as sensors—mostly for automotive at first, and later for medical applications—the technology has now mushroomed into commercialization in a number of other arenas. In fact, MEMS technology is proving to be a key enabler for many implementations hitherto not possible or practical with conventional electronic devices. Furthermore, it promises to become even more prevalent in at least three "killer" applications: RF, biomedical, and geophysical/environmental fields.

MEMS

Micromechanical

This is a great place to add a tagline.

What is MEMS Technology?

Micro-Electro-Mechanical Systems, or MEMS, is a technology that in its most general form can be defined as miniaturized mechanical and electro-mechanical elements (i.e., devices and structures) that are made using the techniques of microfabrication.

 

The critical physical dimensions of MEMS devices can vary from well below one micron on the lower end of the dimensional spectrum, all the way to several millimeters. Likewise, the types of MEMS devices can vary from relatively simple structures having no moving elements, to extremely complex electromechanical systems with multiple moving elements under the control of integrated microelectronics.

 

The one main criterion of MEMS is that there are at least some elements having some sort of mechanical functionality whether or not these elements can move.

 

The term used to define MEMS varies in different parts of the world. In the United States they are predominantly called MEMS, while in some other parts of the world they are called “Microsystems Technology” or “micromachined devices”.

 

While the functional elements of MEMS are miniaturized structures, sensors, actuators, and microelectronics, the most notable (and perhaps most interesting) elements are the microsensors and microactuators.

 

Microsensors and microactuators are appropriately categorized as “transducers”, which are defined as devices that convert energy from one form to another. In the case of microsensors, the device typically converts a measured mechanical signal into an electrical signal.

Website MEMS based pressure system.JPG
Website MEMS.JPG

Neural Dust Motes

Tell customers more about you. Add a few words and a stunning pic to grab their attention and get them to click.

This space is ideal for writing a detailed description of your business and the types of services that you provide. Talk about your team and your areas of expertise. 

I'm a paragraph. Click here to add your own text and edit me. It's easy.

Modulation of ultrasound to produce multifrequency radiation force

Matthew W. Urban,b) Mostafa Fatemi, and James F. Greenleaf

http://www.ncbi.nlm.nih.gov/pmc/articles/PMC2856505/


Abstract

Dynamic radiation force has been used in several types of applications, and is performed by modulating ultrasound with different methods. By modulating ultrasound, energy can be transmitted to tissue, in this case a dynamic force to elicit a low frequency cyclic displacement to inspect the material properties of the tissue. In this paper, different types of modulation are explored including:

 

  • amplitude modulation (AM),

  • double sideband suppressed carrier amplitude modulation AM,

  • linear frequency modulation, and

  • frequency-shift keying.

 

Generalized theory is presented for computing the radiation force through the short-term time average of the energy density for these various types of modulation. Examples of modulation with different types of signals including sine waves, square waves, and triangle waves are shown. Using different modulating signals, multifrequency radiation force with different numbers of frequency components can be created, and can be used to characterize tissue mimicking materials and soft tissue. Results for characterization of gelatin phantoms using a method of vibrating an embedded sphere are presented. Different degrees of accuracy were achieved using different modulation techniques and modulating signals. Modulating ultrasound is a very flexible technique to produce radiation force with multiple frequency components that can be used for various applications.

Chronically Implanted Pressure Sensors: Challenges and State of the Field

www.mdpi.com/1424-8220/14/11/20620/pdf

Abstract: Several conditions and diseases are linked to the elevation or depression of internal pressures from a healthy, normal range, motivating the need for chronic implantable pressure sensors. A simple implantable pressure transduction system consists of a pressure-sensing element with a method to transmit the data to an external unit. The biological environment presents a host of engineering issues that must be considered for long term monitoring. Therefore, the design of such systems must carefully consider interactions between the implanted system and the body, including biocompatibility, surgical placement, and patient comfort. Here we review research developments on implantable sensors for chronic pressure monitoring within the body, focusing on general design requirements for implantable pressure sensors as well as specifications for different medical applications. We also discuss recent efforts to address biocompatibility, efficient telemetry, and drift management, and explore emerging trends.

Pressure Sensor

Stanford Engineering Team Invents Pressure Sensor That Uses Radio Waves

http://www.cytofluidix.com/stanford-engineering-team-invents-pressure-sensor-that-uses-radio-waves/

Posted on August 7, 2015 by Admin

Website Pressure Sensore.JPG
Website Pressure Sensors chronic.JPG